Ultra Cut Polishing Compound One Step 3 In 1
Exclusive, super-micro abrasive technology
Ultra-fast cutting removes 1500 grit or finer sanding marks
Super-micro abrasives leaves best in class finish
Great for removing scratches, defects, acid rain and severe swirls/holograms
Product Description
Exclusive, super-micro abrasive technology
Ultra-fast cutting removes 1500 grit or finer sanding marks
Super-micro abrasives leaves best in class finish
Great for removing scratches, defects, acid rain and severe swirls/holograms
Key Benefits, special features
Versatile:Suitable for all types of coating, MS or HS paints
Silicone Free & wax fee:safe for use in spray shop
Standard process:Step 1
Polishing System
Recommended Usage
1.Clean surface thoroughly prior to polishing.
2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).
3.Use the Lambs wool Pad W5006 in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine.
5.If working on very dry coatings, soak the pad, and spin off excess water, to prevent dust formation.
6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.
8.Any signs of sanding and use have now been removed. For an exceptionally glossy finish and protection, apply 908 Ultra Seal.